Shure Axient AD4DNP Two-Channel Digital Wireless Receiver - C Band

Shure Axient AD4DNP Two-Channel Digital Wireless Receiver - C Band

The AD4D Axient Digital Dual Receiver sets a new standard in transparent digital audio and maximum spectral efficiency. Groundbreaking performance features include wide tuning, low latency, and High Density (HD) mode, ensuring solid performance in the most challenging RF environments. Networked control and signal routing options bring a new level of management and flexibility to your entire workflow. Compatible with all Axient Digital transmitters.

Features:

• Wide tuning range up to 184MHz
• True digital diversity reception per channel for drop-out resistance
• Networked control with Wireless Workbench® and ShurePlus™ Channels app
• Front panel headphone jack enables Dante Cue and Dante Browse monitoring
• Configurable Ethernet switch for redundant Dante digital output
• AES3 output
• Channel Quality meter displays RF signal-to-noise
• Locking AC connectors
• Optional DC module available to support redundant power

Specifications:

• Dimensions: 44 mm × 483 mm × 333 mm (1.7 in. × 19.0 in. × 13.1 in.), H × W × D
• Weight: 4.6 kg (10.1 lbs), without antennas
• Housing: Steel; Extruded aluminum
• Power Requirements: 100 to 240 V AC, 50–60 Hz; 0.26 A max.
• Thermal Dissipation:
  • Maximum: 23 W (78 BTU/hr)
  • Idle: 15 W (52 BTU/hr)
• Audio Output:
  • Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
  • Configuration:
    • 1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground)
    • XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
  • Impedance (Typical, XLR Line out): 100Ω
  • Full Scale Output (200 kΩ load):
    • 1/4" (6.35 mm): +8 dBV
    • XLR: LINE setting= +18 dBV, MIC setting= –12 dBV
  • Mic/Line Switch: 30 dB pad
  • Phantom Power Protection: Yes
• Networking:
  • Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Ethernet Cable Length: 100 m (328 ft)
• Cascade output:
  • Connector Type: BNC
  • Configuration: Unbalanced, passive
  • Impedance: 50 Ω
  • Insertion Loss: 0 dB, typical
• RF Input:
  • Spurious Rejection: >80 dB, typical
  • Connector Type: BNC
  • Impedance: 50 Ω
  • Bias Voltage: 12–13.5 V DC, 150 mA maximum, per antenna, switchable on/off
• RF Carrier Frequency Range: C: 750–960 MHz